Installation

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ECU: INSTALLATION

INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ECU





(a) Connect the connector to the tire pressure warning ECU.





(b) Install the tire pressure warning ECU with the nut.
Torque: 8.5 Nm (87 kgf-cm, 75in-lbf)
HINT: Engage the tab into the hole as shown in the illustration to install the tire pressure warning ECU.

2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation
3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation
4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation
5. INSTALL FRONT DOOR SCUFF PLATE RH Installation
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. REGISTER TRANSMITTER ID
HINT: It is necessary to register all transmitter IDs Programming and Relearning.

8. INSPECT TIRE PRESSURE WARNING SYSTEM
(a) Inspect the tire pressure warning system Test Mode Procedure.