Installation

U660F AUTOMATIC TRANSMISSION / TRANSAXLE: SPEED SENSOR: INSTALLATION

INSTALLATION

1. INSTALL SPEED SENSOR





(a) Coat the 2 bolts with ATF.
(b) Install the speed sensor to the valve body with the 2 bolts.
Torque: 11 Nm (112 kgf-cm, 8ft-lbf)
(c) Connect the connector.
2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY Installation
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Installation
4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY Installation
5. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
HINT: See the steps from "Install Transfer Assembly" through "Install Engine Assembly with Transaxle" Installation.