Disassembly

U660F AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: DISASSEMBLY

DISASSEMBLY

1. REMOVE POSITION INDICATOR HOUSING SUB-ASSEMBLY
(a) Remove the shift lever cap from the position indicator housing sub-assembly.





(b) Disengage the 4 claws and remove the position indicator housing sub-assembly.
2. REMOVE POSITION INDICATOR LIGHT GUIDE





(a) Disengage the 4 claws and remove the position indicator connector and position indicator light guide.
3. REMOVE SHIFT LOCK RELEASE BUTTON





(a) Disengage the 2 claws to remove the shift lock release button and compression spring.
4. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY





(a) Remove the indicator light wire sub-assembly from the position indicator light guide.
5. REMOVE POSITION INDICATOR LIGHT BULB
(a) Remove the position indicator light cap from the position indicator light bulb.
(b) Remove the position indicator light bulb from the indicator light wire sub-assembly.
6. REMOVE UPPER POSITION INDICATOR HOUSING





(a) Detach the 4 claws and remove the upper position indicator housing from the lower position indicator housing.
7. REMOVE POSITION INDICATOR SLIDE COVER





(a) Remove the position indicator slide cover from the lower position indicator housing.
8. REMOVE NO. 2 POSITION INDICATOR SLIDE COVER
(a) Remove the No. 2 position indicator slide cover from the position indicator slide cover.
9. REMOVE LOWER POSITION INDICATOR HOUSING





(a) Detach the 2 claws and remove the lower position indicator housing from the shift lock control unit assembly.
10. REMOVE SHIFT LOCK CONTROL COMPUTER SUB-ASSEMBLY





(a) Disconnect the connector from the shift lock control computer sub-assembly.
(b) Detach the 3 claws and remove the shift lock control computer sub-assembly.