Installation

U660F AUTOMATIC TRANSMISSION / TRANSAXLE: ATF TEMPERATURE SENSOR: INSTALLATION

INSTALLATION

1. INSTALL ATF TEMPERATURE SENSOR ASSEMBLY





(a) Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly.

Text in Illustration





(b) Coat the 4 bolts with ATF.





(c) Install the ATF temperature sensor assembly and clamp to the valve body with the 4 bolts.

Text in Illustration





Torque: 11 Nm (112 kgf-cm, 8ft-lbf)
Bolt length:
Bolt A
25 mm (0.984 in.)
Bolt B
85 mm (3.35 in.)
(d) Connect the connector.
2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Installation
3. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY Installation
4. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
HINT: See the steps from "Install Transfer Assembly" through "Install Engine Assembly with Transaxle" Installation.