Installation

U660F AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: INSTALLATION

INSTALLATION

1. INSTALL TRANSMISSION WIRE





(a) Coat the O-ring with ATF.
(b) Coat the bolt with ATF.





(c) Install the transmission wire and lock plate to the valve body with the bolt.
Torque: 11 Nm (112 kgf-cm, 8ft-lbf)





(d) Install the transmission wire to the clamp.
(e) Connect the 9 connectors.
2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY Installation
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Installation
4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY Installation
5. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
HINT: See the steps from "Install Transfer Assembly" through "Install Engine Assembly with Transaxle" Installation.