Replacement

MF1A TRANSFER / 4WD / AWD: TRANSFER CASE FRONT OIL SEAL: REPLACEMENT

REPLACEMENT

1. REMOVE TRANSFER ASSEMBLY Removal.
2. REMOVE TRANSFER CASE FRONT OIL SEAL





(a) Using SST, remove the transfer case front oil seal from the transfer case.
SST: 09308-00010
NOTICE: Do not damage the oil seal contact surface on the case.

3. INSTALL TRANSFER CASE FRONT OIL SEAL





(a) Using SST, drive in a new transfer case front oil seal into the transfer case until it reaches the position shown in the illustration.
SST: 09608-10010
SST: 09950-70010
09951-07150
Drive in depth:
9.5 to 10.5 mm (0.374 to 0.413 in.)
NOTICE: Do not tilt the oil seal during installation.

(b) Apply a small amount of MP grease to the lip of the oil seal.
4. INSTALL TRANSFER ASSEMBLY Installation.