Installation

THEFT DETERRENT / KEYLESS ENTRY: CERTIFICATION ECU: INSTALLATION

INSTALLATION

1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)





(a) Install the certification ECU (smart key ECU assembly) with the 2 nuts.





(b) Connect each connector.
2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation
3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation
4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY
HINT: Use the same procedure for the RH side and LH side Installation.

5. INSTALL FRONT DOOR SCUFF PLATE
HINT: Use the same procedure for the RH side and LH side Installation.

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. REGISTER KEY
NOTICE: When replacing the certification ECU (smart key ECU assembly), perform initialization Engine Immobiliser System (W/ Smart Key System).

8. REGISTER ECU COMMUNICATION ID
NOTICE: When replacing the certification ECU (smart key ECU assembly), perform initialization Engine Immobiliser System (W/ Smart Key System).