Satellite Radio Broadcast Cannot be Selected or After Selecting Broadcast, Broadcast Cannot be Added into Memory

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory

Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory

INSPECTION PROCEDURE
NOTICE:
- Some satellite radio broadcasts require payment. A contract must be made between a satellite radio service and the user. If the contract expires, it will not be possible to listen to the broadcast.
- After replacing the stereo component tuner assembly of vehicles subscribed to pay-type satellite radio broadcasts, registration of the XM radio ID is necessary.

PROCEDURE

1. CHECK SATELLITE RADIO
(a) Check radio condition.

Result





B -- CHECK SATELLITE RADIO
A -- REPLACE STEREO COMPONENT TUNER ASSEMBLY
2. CHECK SATELLITE RADIO
(a) Check the number of preset channels.
OK:
18 channels have already been preset.

NG -- CHECK BATTERY
OK -- END (ONLY 18 CHANNELS CAN BE PRESET)
3. CHECK BATTERY
(a) Check if the battery was replaced.
OK:
Battery was not replaced.

NG -- ADD PRESET CHANNEL INTO MEMORY AGAIN
OK -- REPLACE STEREO COMPONENT TUNER ASSEMBLY
4. ADD PRESET CHANNEL INTO MEMORY AGAIN
(a) Check if the preset channels that have been cleared can be added into memory again.
OK:
Preset channels can be added into memory.

NG -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE
OK -- END