Reassembly

EXTERIOR PANELS / TRIM: REAR BUMPER: REASSEMBLY

REASSEMBLY

1. INSTALL NO. 1 REAR BUMPER REINFORCEMENT





(a) Install the No. 1 rear bumper reinforcement with the 6 nuts.
Torque: 68 Nm (693 kgf-cm, 50ft-lbf)
2. INSTALL REAR BUMPER ENERGY ABSORBER





(a) Engage the 2 guides to install the rear bumper energy absorber.
3. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH





(a) Engage the 2 claws and install the No. 2 rear bumper side support LH.
(b) Install the screw.
4. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT RH
HINT: Use the same procedure for the RH side and LH side.

5. INSTALL REAR BUMPER SIDE RETAINER LH





(a) Engage the 2 claws and install the rear bumper side retainer LH.
(b) Install the screw.
6. INSTALL REAR BUMPER SIDE RETAINER RH
HINT: Use the same procedure for the RH side and LH side.

7. INSTALL REAR BUMPER SPOILER LH (for 1AR-FE)





(a) Install the rear bumper spoiler LH with the screw.

Text in Illustration





(b) Install the clip and outside moulding retainer.
8. INSTALL REAR BUMPER PAD RH





(a) Install a new rear bumper pad RH.
9. INSTALL REFLEX REFLECTOR ASSEMBLY LH





(a) Engage the guide.
(b) Install the reflex reflector assembly LH with the screw.
10. INSTALL REFLEX REFLECTOR ASSEMBLY RH
HINT: Use the same procedure for the RH side and LH side.