Disassembly

INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: DISASSEMBLY

DISASSEMBLY

1. REMOVE NO. 1 CONSOLE BOX CARPET





(a) Remove the No. 1 console box carpet.
2. REMOVE CONSOLE HOLDER





(a) Pull the console holder in the direction indicated by the arrow to remove the console holder.
3. REMOVE INSTRUMENT PANEL CUP HOLDER DAMPER





(a) Pull the instrument panel cup holder damper in the direction indicated by the arrow to remove the instrument panel cup holder damper.
4. REMOVE CONSOLE BOX POCKET





(a) Pull the console box pocket in the direction indicated by the arrow to disengage the 2 guides and remove the console box pocket.
5. REMOVE FRONT CONSOLE BOX COVER





(a) Disengage the clamp.
(b) Remove the 3 screws.
(c) Disengage the 2 claws and remove the front console box cover.
6. REMOVE STEREO JACK ADAPTER ASSEMBLY Removal
7. REMOVE REAR CONSOLE UPPER PANEL SUB-ASSEMBLY





(a) Slide the rear console upper panel sub-assembly in the direction indicated by the arrow and remove the rear console upper panel sub-assembly.
8. REMOVE NO. 2 CONSOLE BOX DUCT





(a) Remove the 2 screws and the No. 2 console box duct.
9. REMOVE CONSOLE MOUNTING RETAINER ASSEMBLY





(a) Using a moulding remover, disengage the 5 claws and remove the console mounting retainer assembly.
10. REMOVE CONSOLE BOX WIRE





(a) Disconnect the connectors to remove the console box wire.
11. REMOVE CONSOLE BOX ILLUMINATION LIGHT ASSEMBLY Removal
12. REMOVE CENTER POWER POINT SOCKET ASSEMBLY Removal
13. REMOVE CENTER POWER OUTLET SOCKET COVER Removal
14. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY





(a) Disengage the 4 clips and remove the rear console end panel sub-assembly.
15. REMOVE REAR CONSOLE ARMREST ASSEMBLY





(a) Using a screwdriver, remove the 2 E-rings.
NOTICE: Be careful not to allow the E-rings to pop out when removing them.





(b) Using a screwdriver, pull out the box door hinge shafts.

Text in Illustration





HINT:
- Tape the screwdriver tip before use.
- The illustration is for the LH side.
- Use the same procedure for the RH side and LH side.

(c) Remove the rear console armrest assembly.