Installation

DOOR LOCK: UNLOCK WARNING SWITCH: INSTALLATION

INSTALLATION

1. INSTALL UNLOCK WARNING SWITCH





(a) Engage the 2 claws and install the unlock warning switch to the steering column upper bracket.
(b) Extract the key.





(c) Connect the connector.
2. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY Installation
3. INSTALL UPPER STEERING COLUMN COVER Installation
4. INSTALL LOWER STEERING COLUMN COVER Installation
5. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
6. ADJUST SPIRAL CABLE Installation
7. INSTALL STEERING WHEEL ASSEMBLY Installation
8. INSTALL STEERING PAD Installation
9. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation
10. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation
11. INSPECT STEERING WHEEL CENTER POINT
12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

13. INSPECT STEERING PAD Installation
14. INSPECT SRS WARNING LIGHT Diagnosis System