Reassembly

SLIDING ROOF / CONVERTIBLE: SLIDING ROOF HOUSING: REASSEMBLY

REASSEMBLY

1. INSTALL NO. 1 SUNSHADE TRIM SUB-ASSEMBLY





(a) Slide and install the No. 1 sunshade trim sub-assembly.
2. INSTALL NO. 2 SUNSHADE TRIM SUB-ASSEMBLY





(a) Slide and install the No. 2 sunshade trim sub-assembly.
3. INSTALL NO. 3 SUNSHADE TRIM SUB-ASSEMBLY





(a) Slide and install the No. 3 sunshade trim sub-assembly.
4. INSTALL NO. 4 SUNSHADE TRIM SUB-ASSEMBLY





(a) Slide and install the No. 4 sunshade trim sub-assembly.





(b) Install the front sliding roof sunshade stopper LH with the screw.
HINT: Use the same procedure for the RH side and the LH side.





(c) Install the center sliding roof sunshade stopper LH with the screw.
HINT: Use the same procedure for the RH side and the LH side.





(d) Install the rear sliding roof sunshade stopper LH with the screw.
HINT: Use the same procedure for the RH side and the LH side.

5. INSTALL SLIDING ROOF HOUSING CENTER FRAME





(a) Install the sliding roof housing center frame with the 2 nuts.
Torque: 7.0 Nm (71 kgf-cm, 62in-lbf)