Removal

1AR-FE ENGINE MECHANICAL: FRONT CRANKSHAFT OIL SEAL: REMOVAL

REMOVAL

1. REMOVE FRONT WHEEL RH
2. REMOVE NO. 1 ENGINE UNDER COVER
3. SEPARATE FRONT FENDER LINER RH
4. REMOVE FRONT FENDER APRON SEAL RH Removal
5. REMOVE V-RIBBED BELT Removal
6. REMOVE CRANKSHAFT PULLEY





(a) Using SST, hold the crankshaft pulley and loosen the pulley bolt. Further loosen the bolt until 2 or 3 threads are screwed into the crankshaft.
SST: 09213-54015
SST: 09330-00021
SST: 91551-80650





(b) Using SST and the pulley bolt, remove the crankshaft pulley.
SST: 09950-50013
09951-05010
09952-05010
09953-05020
09954-05011
HINT: Apply a lubricant to the threads and end of SST.

7. REMOVE TIMING CHAIN COVER OIL SEAL





(a) Using a screwdriver, pry out the oil seal.
HINT: Tape the screwdriver tip before use.
NOTICE: Do not damage the surface of the oil seal press fit hole or the crankshaft.