Installation

LIGHTING (EXT): HEIGHT CONTROL SENSOR: INSTALLATION

INSTALLATION

1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY (for 2WD)

(a) Install the rear height control sensor sub-assembly with the 3 nuts.
Nut (A) - Torque: 8.0 Nm (82 kgf-cm, 71in-lbf)
Nut (B) - Torque: 5.4 Nm (55 kgf-cm, 48in-lbf)
(b) Connect the connector.
3. HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION Initialization
4. PREPARE VEHICLE FOR HEADLIGHT AIM ADJUSTMENT Adjustments
5. PREPARE FOR HEADLIGHT AIMING Adjustments
6. INSPECT HEADLIGHT AIMING Adjustments
7. ADJUST HEADLIGHT AIMING Adjustments