Removal

LIGHTING (EXT): HIGH INTENSITY DISCHARGE HEADLIGHT BULB: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE NO. 1 HEADLIGHT BACK COVER





(a) Release the set spring as shown in the illustration.
(b) Disengage the 2 guides and remove the No. 1 headlight back cover.
3. REMOVE HEADLIGHT GASKET
(a) Remove the headlight gasket.
NOTICE: Do not reuse the removed headlight gasket. Be sure to install a new headlight gasket to prevent water ingress.

4. REMOVE DISCHARGE HEADLIGHT BULB





(a) Turn the light control ECU socket in the direction indicated by the arrow shown in the illustration and disconnect it.





(b) Release the set spring in the direction indicated by the arrow shown in the illustration and remove the discharge headlight bulb.
NOTICE: Do not touch the bulb glass.