Installation

LIGHTING (EXT): HEADLIGHT ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL HEADLIGHT ASSEMBLY
(a) Connect each connector.





(b) Install the headlight assembly with the bolt and 3 screws.
Torque: 3.6 Nm (37 kgf-cm, 32in-lbf)
2. INSTALL FRONT BUMPER ASSEMBLY Installation
3. INSTALL RADIATOR GRILLE Installation
4. INSTALL RADIATOR GRILLE PROTECTOR Installation
5. INSTALL COOL AIR INTAKE DUCT SEAL Installation
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. PREPARE VEHICLE FOR HEADLIGHT AIM ADJUSTMENT Adjustments
8. PREPARE FOR HEADLIGHT AIMING (Using a headlight aim test machine) Adjustments
9. PREPARE FOR HEADLIGHT AIMING (Using a screen) Adjustments
10. INSPECT HEADLIGHT AIMING Adjustments
11. ADJUST HEADLIGHT AIMING Adjustments
12. PREPARE VEHICLE FOR FOG LIGHT AIMING Adjustments
13. PREPARE FOR FOG LIGHT AIMING Adjustments
14. INSPECT FOG LIGHT AIMING Adjustments
15. ADJUST FOG LIGHT AIMING Adjustments