Removal

1AR-FE BATTERY / CHARGING: GENERATOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE COOL AIR INTAKE DUCT SEAL Removal
3. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal
4. REMOVE V-RIBBED BELT
HINT: Removal





5. REMOVE WIRE HARNESS CLAMP BRACKET
(a) Detach the wire harness clamp from the clamp bracket.
(b) Remove the bolt and clamp bracket.
6. REMOVE GENERATOR ASSEMBLY





(a) Disconnect the generator connector.
(b) Remove the terminal cap.
(c) Remove the nut and disconnect the generator wire.
(d) Remove the bolt and wire harness clamp bracket.





(e) Remove the 2 bolts and generator.