Installation

REAR SUSPENSION: REAR STABILIZER BAR (for 2WD): INSTALLATION

INSTALLATION

1. INSTALL REAR STABILIZER BUSHING (for LH Side)





(a) Install the rear stabilizer bushing.
NOTICE: Bushing slit should always face vehicle forwards, even if bushing "FRONT" text does not exist.

2. INSTALL REAR STABILIZER BUSHING (for RH Side)
HINT: Perform the same procedure as the LH side.

3. INSTALL REAR NO. 1 STABILIZER BAR BRACKET (for LH Side)





(a) Install the rear No. 1 stabilizer bar bracket.
4. INSTALL REAR NO. 1 STABILIZER BAR BRACKET (for RH Side)
HINT: Perform the same procedure as the LH side.

5. INSTALL REAR STABILIZER BAR





(a) Install the rear stabilizer bar with the 4 bolts in order 1 to 2.
Torque: 19 Nm (194 kgf-cm, 14ft-lbf)
6. INSTALL REAR STABILIZER LINK ASSEMBLY LH





(a) Install the rear stabilizer link assembly LH to the rear shock absorber with coil spring LH with the nut.

Text in Illustration





Torque: 39 Nm (400 kgf-cm, 29ft-lbf)
HINT: If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud bolt.





(b) Install the rear stabilizer link assembly LH to the rear stabilizer bar with the nut.

Text in Illustration





Torque: 39 Nm (400 kgf-cm, 29ft-lbf)
HINT: If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud bolt.

7. INSTALL REAR STABILIZER LINK ASSEMBLY RH
HINT: Perform the same procedure as the LH side.

8. INSTALL REAR WHEELS
Torque: 103 Nm (1050 kgf-cm, 76ft-lbf)