Reassembly

EXTERIOR PANELS / TRIM: FRONT BUMPER: REASSEMBLY

REASSEMBLY

1. INSTALL FRONT BUMPER SIDE RETAINER LH





(a) Engage the claw and install the front bumper side retainer LH.

Text in Illustration





(b) Install the bolt and screw.
Bolt - Torque: 3.6 Nm (37 kgf-cm, 32in-lbf)
2. INSTALL FRONT BUMPER SIDE RETAINER RH
HINT: Use the same procedure for the RH side and LH side.

3. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY





(a) Install the front bumper reinforcement sub-assembly with the 6 bolts.
Torque: 34 Nm (347 kgf-cm, 25ft-lbf)
(b) Engage the 4 clamps.
4. INSTALL FRONT BUMPER ENERGY ABSORBER





(a) Engage the 2 guides to install the front bumper energy absorber.
5. INSTALL FRONT FENDER LINER RETAINER





(a) Install the front fender liner retainer.
HINT: Use the same procedure for the RH side and LH side.

6. INSTALL NO. 1 LOWER RADIATOR GRILLE





(a) Engage the 14 claws to install the No. 1 lower radiator grille.
7. INSTALL FRONT BUMPER HOLE COVER LH





(a) Engage the 4 claws and pin, and install the front bumper hole cover LH.
8. INSTALL FRONT BUMPER HOLE COVER RH
HINT: Use the same procedure for the RH side and LH side.

9. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light) Installation
10. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)
HINT: Use the same procedure for the RH side and LH side.

11. INSTALL FRONT LICENSE PLATE BRACKET





(a) Install the front license plate bracket with the 2 screws.