Reassembly

INTERIOR PANELS / TRIM: ROOF HEADLINING: REASSEMBLY

REASSEMBLY

1. INSTALL NO. 14 ROOF SILENCER PAD
(a) Align the markings on the roof headlining assembly with the No. 14 roof silencer pad and install the silencer pad using hot-melt glue as shown in the illustration.





2. INSTALL NO. 1 ROOF WIRE (w/o Sliding Roof)
(a) w/o Vanity Light:
(1) Install the No. 1 roof wire.





Text in Illustration





(2) Apply adhesive tape to the locations shown in the illustration.
HINT: As shown in the illustration, line up and secure the reference tape of the wire harness to the tip of the roof headlining assembly.

(b) w/ Vanity Light:
(1) Install the No. 1 roof wire.





Text in Illustration





(2) Turn the visor connectors clockwise approximately 90° to install the connectors to the roof headlining assembly.
(3) Apply adhesive tape to the locations shown in the illustration.
HINT: As shown in the illustration, line up and secure the reference tape of the wire harness to the tip of the roof headlining assembly.

3. INSTALL NO. 1 ROOF WIRE (w/ Sliding Roof)
(a) Install the No. 1 roof wire.





Text in Illustration





(b) Turn the visor connectors clockwise approximately 90° to install the connectors to the roof headlining assembly.
(c) Apply adhesive tape to the locations shown in the illustration.
HINT: As shown in the illustration, line up and secure the reference tape of the wire harness to the tip of the roof headlining assembly.

4. INSTALL NO. 2 ROOF WIRE (w/ Rear Seat Entertainment System)
(a) Install the No. 2 roof wire.





Text in Illustration





(b) Apply adhesive tape to the locations shown in the illustration.
HINT: As shown in the illustration, line up and secure the reference tape of the wire harness to the tip of the roof headlining assembly.

5. INSTALL NO. 2 ROOF SILENCER PAD (w/o Sliding Roof)
(a) Align the markings on the roof headlining assembly with the 2 No. 2 roof silencer pads and install the silencer pad using hot-melt glue or double-sided tape as shown in the illustration.





6. INSTALL NO. 3 ROOF SILENCER PAD (w/o Sliding Roof)
(a) w/o Rear Seat Entertainment System:
(1) Align the markings on the roof headlining assembly with the 3 No. 3 roof silencer pads and install the silencer pad using hot-melt glue or double-sided tape as shown in the illustration.





(b) w/ Rear Seat Entertainment System:
(1) Align the markings on the roof headlining assembly with the 2 No. 3 roof silencer pads and install the silencer pad using hot-melt glue or double-sided tape as shown in the illustration.





7. INSTALL FRONT SIDE RAIL SPACER LH (w/o Sliding Roof)
(a) Align the markings on the roof headlining assembly with the roof side rail spacer LH and install the spacer using hot-melt glue as shown in the illustration.





8. INSTALL FRONT SIDE RAIL SPACER RH (w/o Sliding Roof)
HINT: Use the same procedure for the RH side and the LH side.

9. INSTALL VANITY LIGHT ASSEMBLY (w/ Vanity Light)
(a) Install the vanity light assembly Installation.
HINT: Use the same procedure for the RH side and the LH side.

10. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/o Sliding Roof) Installation
11. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/ Sliding Roof) Installation