Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: SKID CONTROL BUZZER: REMOVAL

REMOVAL

1. PRECAUTION
CAUTION: Be sure to read Precaution thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE TO NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY
HINT: Refer to the procedure up to Remove Driver Side Knee Airbag Assembly Removal.

4. REMOVE SKID CONTROL BUZZER ASSEMBLY

(a) Separate the wire harness clamp.

(b) Remove the skid control buzzer assembly clamp.