Removal

POWER OUTLETS (INT): REAR POWER OUTLET SOCKET: REMOVAL

REMOVAL

1. REMOVE REAR DOOR SCUFF PLATE RH
HINT: Use the same procedure for the RH side and the LH side Removal.

2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
HINT: Use the same procedure for the RH side and the LH side Removal.

3. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) Removal
4. REMOVE DECK BOARD ASSEMBLY Removal
5. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY Removal
6. REMOVE DECK SIDE TRIM BOX LH Removal
7. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY Removal
8. REMOVE DECK SIDE TRIM BOX RH Removal
9. REMOVE NO. 1 DECK BOARD Removal
10. REMOVE REAR SEAT SUB FLOOR PANEL ASSEMBLY Removal
11. REMOVE REAR FLOOR FINISH PLATE Removal
12. REMOVE REAR SEAT HEADREST ASSEMBLY Removal
13. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY Removal
14. REMOVE REAR SEAT INNER TRACK BRACKET COVER Removal
15. REMOVE REAR SEAT OUTER TRACK BRACKET COVER Removal
16. DISCONNECT REAR SEAT RECLINING CONTROL CABLE Removal
17. REMOVE REAR SEAT ASSEMBLY RH Removal
18. REMOVE RECLINING REMOTE CONTROL BEZEL RH
HINT: Use the same procedure for the RH side and the LH side Removal.

19. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY
HINT: Use the same procedure for the RH side and the LH side Removal.

20. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY RH
HINT: Use the same procedure for the RH side and the LH side Removal.

21. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH Removal
22. REMOVE REAR POWER POINT SOCKET ASSEMBLY





(a) Using a screwdriver, disengage the 2 claws and remove the rear power point socket assembly as shown in the illustration.

Text in Illustration





HINT: Tape the screwdriver tip before use.

23. REMOVE REAR POWER POINT SOCKET COVER





(a) Disengage the 2 claws and remove the rear power point socket cover.
24. REMOVE SIDE TRIM COVER RH (w/ Voltage Inverter) Removal
25. REMOVE POWER OUTLET SOCKET ASSEMBLY (w/ Voltage Inverter)





(a) Disengage the 2 claws and remove the power outlet socket assembly.