Removal

2GR-FE ENGINE CONTROL: HEATED OXYGEN SENSOR: REMOVAL

REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER
2. REMOVE NO. 2 ENGINE UNDER COVER
3. REMOVE FRONT DOOR SCUFF PLATE LH Removal
4. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal
5. REMOVE NO. 3 FRONT EXHAUST PIPE SUB-ASSEMBLY Removal
6. REMOVE OXYGEN SENSOR (for Bank 1 Sensor 2)





(a) Using SST, remove the oxygen sensor from the No. 3 front exhaust pipe sub-assembly.
SST: 09224-00010
7. REMOVE FRONT EXHAUST PIPE ASSEMBLY Removal
8. REMOVE NO. 2 OXYGEN SENSOR (for Bank 2 Sensor 2)





(a) Using SST, remove the No. 2 oxygen sensor from the front exhaust pipe assembly.
SST: 09224-00010