Replacement

2GR-FE BATTERY / CHARGING: GENERATOR: REPLACEMENT

REPLACEMENT

1. REPLACE GENERATOR DRIVE END FRAME BEARING





(a) Remove the 4 screws and bearing retainer from the drive end frame.





(b) Using SST and a hammer, tap out the drive end frame bearing from the drive end frame.
SST: 09950-60010
09951-00250
SST: 09950-70010
09951-07100





(c) Using SST and a press, press in a new generator drive end frame bearing.
SST: 09950-60010
09951-00470
SST: 09950-70010
09951-07100





(d) Fit the tabs on the retainer plate into the cutouts on the drive end frame to install the retainer plate.

Text in Illustration





(e) Install the 4 screws.
Torque: 2.3 Nm (23 kgf-cm, 20in-lbf)