Removal

2GR-FE STARTING: STARTER: REMOVAL

REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
4. REMOVE INLET NO. 2 AIR CLEANER Removal
5. REMOVE BATTERY Removal
6. REMOVE INLET NO. 1 AIR CLEANER Removal
7. REMOVE STARTER ASSEMBLY





(a) Disconnect the starter connector.
(b) Remove the terminal cap.
(c) Remove the nut and disconnect the starter wire.





(d) Remove the 2 bolts and starter.