Removal

FRONT SUSPENSION: FRONT STABILIZER BAR (for 2GR-FE): REMOVAL

REMOVAL

1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
HINT: Refer to the procedure up to Remove Engine Assembly with Transaxle Removal.

2. SEPARATE FRONT STABILIZER LINK ASSEMBLY LH





(a) Remove the nut and separate the front stabilizer link assembly LH.
HINT: If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.

3. SEPARATE FRONT STABILIZER LINK ASSEMBLY RH
HINT: Perform the same procedure as the LH side.

4. REMOVE FRONT NO. 1 STABILIZER BRACKET LH





(a) Remove the 2 bolts and No. 1 front stabilizer bracket LH from the front frame assembly.
5. REMOVE FRONT NO. 1 STABILIZER BRACKET RH
HINT: Perform the same procedure as the LH side.

6. REMOVE FRONT STABILIZER BAR
7. REMOVE FRONT NO. 2 STABILIZER BRACKET LH





(a) Remove the No. 2 front stabilizer bracket LH from the front stabilizer bar bushing.
8. REMOVE FRONT NO. 2 STABILIZER BRACKET RH
HINT: Perform the same procedure as the LH side.

9. REMOVE FRONT NO. 1 STABILIZER BAR BUSHING
(a) Remove the 2 No. 1 front stabilizer bar bushings from the front stabilizer bar.