Removal

REAR SUSPENSION: REAR STRUT ROD: REMOVAL

REMOVAL
HINT:
- Use the same procedure for the RH side and LH side.
- The procedure listed below is for the LH side.

1. REMOVE REAR WHEEL
2. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY





(a) Remove the bolt and separate the No. 3 parking brake cable assembly.
3. REMOVE REAR STRUT ROD ASSEMBLY (for 2WD)





(a) Remove the 2 bolts, the 2 nuts and the rear strut rod assembly.
NOTICE: Since stopper nuts are used, loosen the bolts.

4. REMOVE REAR STRUT ROD ASSEMBLY (for AWD)





(a) Remove the 2 bolts, the 2 nuts and the rear strut rod assembly.
NOTICE: Since stopper nuts are used, loosen the bolts.