SRL Solenoid Circuit - ABS (Anti-Lock Brake System) (for Sedan)

BRAKE CONTROL: ANTI-LOCK BRAKE SYSTEM (for Sedan): C0226/21: SFR Solenoid Circuit

DTC C0226/21 - SFR Solenoid Circuit

DTC C0236/22 - SFL Solenoid Circuit

DTC C0246/23 - SRR Solenoid Circuit

DTC C0256/24 - SRL Solenoid Circuit

DESCRIPTION

This solenoid is turned on in accordance with signals from the skid control ECU and controls the pressure on the wheel cylinders to control the braking force.





HINT: C0226/21, C0236/22, C0246/23 and C0256/24:
The skid control ECU begins to detect these DTCs when the vehicle speed exceeds 4 mph (6 km/h).

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. RECONFIRM DTC
(a) Clear the DTC(s) ABS (Antilock Brake System) (for Sedan).
(b) Start the engine.
(c) Drive the vehicle at 4 mph (6 km/h) or more to activate the initial check.
(d) Check if the same DTC(s) is output ABS (Antilock Brake System) (for Sedan).
Result:





HINT: The DTCs may be stored due to a malfunction in the connector terminal.

B -- END
A -- REPLACE BRAKE ACTUATOR