CD Cannot Be Inserted or Is Ejected Right After Insertion

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: CD cannot be Inserted or is Ejected Right After Insertion

CD cannot be Inserted or is Ejected Right After Insertion

INSPECTION PROCEDURE

PROCEDURE

1. CHECK CD
(a) Make sure that the CD is a normal audio CD, and that it is not deformed, flawed, stained, burred or otherwise defective.
OK:
Normal audio CD.
HINT: Translucent or uniquely-shaped CDs cannot be played.

NG -- CD IS FAULTY
OK -- Continue to next step.
2. CHECK THAT CD HAS BEEN INSERTED PROPERLY
(a) Check whether or not the CD was inserted upside down.
OK:
CD was properly inserted.
NG -- INSERT CD PROPERLY
OK -- Continue to next step.
3. CLEAN CD




(a) Clean the disc by wiping the CD's dataside radially with a soft cloth.
OK:
Malfunction disappears.
NOTE: Do not use a conventional record cleaner or anti-static preservative.

OK -- CD WAS DIRTY
NG -- Continue to next step.
4. REPLACE CD
(a) Replace the CD with a normal one and check if the same problem occurs again.
OK:
Malfunction disappears.
NG -- REPLACE RADIO RECEIVER
OK -- CD IS FAULTY