Canada - Body Rocker Panel Moulding Loose - Sedan

Bulletin
TSB3254

Issue Date
December 17,2009

Market
Canada

Title
ROCKER PANEL MOULDING LOOSE

Component
BODY COMPONENTS

Models
'06-'09 Yaris Sedan

INTRODUCTION:
Customers may comment that there is a rubbing noise from under the vehicle due to the rocker panel moulding protector coming loose.
The following repair procedure has been developed to reinstall the molding and correct this condition.






APPLICABILITY:

PRODUCTION CHANGE INFORMATION:







This TSB applies to vehicles produced BEFORE the Production Change Effective VINs shown.






WARRANTY INFORMATION:






PARTS INFORMATION:






REQUIRED TOOLS & EQUIPMENT:

NOTE:
Additional SSTs may be ordered by calling SPX/OTC at 1-800-933-8335.

REPAIR PROCEDURE:
1. Raise vehicle on hoist and inspect underbody for any signs of impact.

NOTE:
If there are signs of impact with an object, this TSB does not apply.

2. If the rocker moulding(s) is dislodged from its mounting locations, refer to the parts information table and replace the moulding with a new service part.







NOTE:
Replace the clips with supply clips if damaged.

NOTE:
Issue of this Technical Service Bulletin is to ensure that proper repair information is available. IT DOES NOT CONSTITUTE AN AUTHORIZATION FOR REPAIR. Normal provisions of the formal warranty policy, as applicable, will apply.