Reading and Clearing Diagnostic Trouble Codes
CRUISE CONTROL: CRUISE CONTROL SYSTEM: DTC CHECK / CLEAR
DTC CHECK / CLEAR
1. DTC CHECK
(a) Connect a Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the tester on.
(d) Enter the following menus: Powertrain / Cruise Control / Trouble Code.
(e) Read the DTCs.
2. DTC CLEAR
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the tester on.
(d) Enter the following menus: Powertrain / Cruise Control / Trouble Code.
(e) Clear the DTCs.