Installation

PARKING BRAKE: PARKING BRAKE SWITCH: INSTALLATION

INSTALLATION





1. INSTALL PARKING BRAKE SWITCH
(a) Install the parking brake switch with the screw.
Torque: 0.9 Nm (9 kgf-cm, 8 in-lbf)
(b) Connect the parking brake switch connector.
2. INSTALL REAR CONSOLE BOX ASSEMBLY Installation
3. INSTALL CONSOLE BOX CARPET Installation
4. INSTALL REAR CONSOLE BOX COVER (for Hatchback) Installation
5. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Sedan) Installation
6. INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY (for Hatchback Manual Transaxle) Installation
7. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for Sedan) Installation
8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
9. INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL (for Sedan) Installation
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)