Removal

LIGHTING: HAZARD WARNING SWITCH (for Sedan): REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE INSTRUMENT CLUSTER FINISH NO.1 PANEL Removal
3. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER Removal
4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal
6. REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY (w/o Radio Receiver) Removal
7. REMOVE RADIO RECEIVER ASSEMBLY (w/ Radio Receiver) Removal
8. REMOVE INSTRUMENT PANEL CENTER REGISTER





(a) Disengage the 8 claws and remove the instrument panel center register.
9. REMOVE HAZARD WARNING SIGNAL SWITCH





(a) Disengage the 3 claws and remove the hazard warning signal switch.