Installation

1NZ-FE EMISSION CONTROL: PURGE VALVE: INSTALLATION

INSTALLATION





1. INSTALL PURGE VSV
(a) Install the purge VSV.
(b) Engage the clip and connect the purge VSV connector.





2. CONNECT FUEL VAPOR FEED HOSE NO. 2
(a) Connect fuel vapor feed hose No. 2.





3. CONNECT FUEL VAPOR FEED HOSE NO. 1
(a) Connect fuel vapor feed hose No. 1.
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)