Installation

1NZ-FE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL: INSTALLATION

INSTALLATION
NOTICE:
- Avoid any physical shock to the accelerator pedal.
- Do not disassemble the accelerator pedal.





1. INSTALL ACCELERATOR PEDAL ASSEMBLY
(a) Install the accelerator pedal with the 2 bolts.
Torque: 10 Nm (102 kgf-cm, 7.4 ft-lbf)
(b) Connect the accelerator pedal connector.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)