Removal

SUPPLEMENTAL RESTRAINT SYSTEM: CENTER AIRBAG SENSOR ASSEMBLY (for Sedan): REMOVAL

REMOVAL
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Service Precautions.

1. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER Removal
2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal
3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Removal
4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal
5. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY Removal
6. REMOVE CONSOLE BOX CARPET Removal
7. REMOVE REAR CONSOLE BOX ASSEMBLY Removal
8. REMOVE INSTRUMENT PAD LOWER LH Removal
9. REMOVE CENTER AIRBAG SENSOR ASSEMBLY




CAUTION: Confirm that the negative battery terminal is disconnected before performing the operation. Even an impact to only the airbag sensor will cause the airbag to deploy.

(a) Pull the lever down and detach the connector holder.





(b) Remove the 3 bolts and remove the airbag sensor.