Installation

SEAT BELT: FRONT PASSENGER SEAT BELT WARNING LIGHT (for Sedan): INSTALLATION

INSTALLATION

1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY (Built in Front Passenger Seat Belt Warning Light)





(a) Engage the 3 claws and install the hazard warning signal switch.
2. INSTALL INSTRUMENT PANEL CENTER REGISTER ASSEMBLY Installation
3. INSTALL RADIO RECEIVER ASSEMBLY (for Integrated with Panel) Installation
4. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY (except Integrated with Panel) Installation
5. INSTALL INSTRUMENT CLUSTER FINISH NO.1 PANEL Installation
6. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation
7. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation
8. INSTALL INSTRUMENT PANEL LOWER CENTER FINISH PANEL Installation
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)