Removal

SEAT BELT: REAR SEAT INNER BELT ASSEMBLY (for Hatchback LH Side): REMOVAL

REMOVAL
NOTE: Always use "Torx" socket wrench E10 when removing the rear seat.

1. REMOVE NO. 1 REAR SEAT LEG COVER (for 60/40 Split Seat Type) Removal
2. REMOVE NO. 2 REAR SEAT LEG COVER (for 60/40 Split Seat Type) Removal
3. REMOVE REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY (for Hold Down Seat Type) Removal
4. REMOVE REAR SEAT INNER BELT ASSEMBLY
(a) for 60/40 Split Seat Type:




(1) Using "Torx" socket wrench E10, remove the 3 bolts and pull up the rear seat cushion.




(2) Remove the belt from the band.
(3) Remove the bolt and the rear seat inner belt.





(b) for Hold Down Seat Type:
(1) Remove the bolt and the rear seat inner belt.