Hazard Warning Switch (for Hatchback)

LIGHTING: HAZARD WARNING SWITCH (for Hatchback): INSPECTION

INSPECTION





1. INSPECT HAZARD WARNING SIGNAL SWITCH
(a) Check the resistance.
(1) Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
Standard Resistance:






If the result is not as specified, replace the hazard warning signal switch.
(b) Check the illumination operation.
(1) Connect the positive (+) battery lead to terminal 3 and the negative (-) battery lead to terminal 2, then check that the illumination illuminates.
Standard:
Illumination illuminates.
If the illumination does not illuminate, replace the hazard warning signal switch.