Removal

POWER STEERING: POWER STEERING ECU (for Hatchback): REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal
3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
4. REMOVE INSTRUMENT CLUSTER FINISH NO.1 PANEL Removal
5. REMOVE COMBINATION METER ASSEMBLY Removal
6. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH Removal
7. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
HINT: Use the same procedure for the RH side as for the LH side.

8. REMOVE FRONT PILLAR GARNISH RH Removal
9. REMOVE FRONT PILLAR GARNISH LH Removal
10. REMOVE NO. 1 SWITCH HOLE BASE Removal
11. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal
12. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY Removal
13. REMOVE POWER STEERING ECU

(a) Separate the wire harness clamp.

(b) Disconnect the 4 connectors.