Installation

U340E AUTOMATIC TRANSAXLE: TRANSMISSION WIRE: INSTALLATION

INSTALLATION

1. INSTALL TRANSMISSION WIRE





(a) Coat a new O-ring with Toyota Genuine ATF WS or equivalent and install it into the transmission wire.





(b) Pass the transmission wire through the transaxle.





(c) Install the transmission wire with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY Installation
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Installation
4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
6. ADD AUTOMATIC TRANSAXLE FLUID Installation
7. INSPECT AUTOMATIC TRANSAXLE FLUID Procedures
8. CHECK FOR AUTOMATIC TRANSAXLE FLUID LEAKAGE
9. INSTALL ENGINE UNDER COVER LH