Removal

U340E AUTOMATIC TRANSAXLE: TRANSMISSION WIRE: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE ENGINE UNDER COVER LH
3. DRAIN AUTOMATIC TRANSAXLE FLUID
(a) Remove the drain plug and gasket, and drain ATF.
(b) Install a new gasket and the drain plug.
Torque: 49 Nm (500 kgf-cm, 36 ft-lbf)
4. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY Removal
5. REMOVE VALVE BODY OIL STRAINER ASSEMBLY Removal
6. REMOVE TRANSMISSION VALVE BODY ASSEMBLY Removal
7. REMOVE TRANSMISSION WIRE





(a) Remove the bolt and the transmission wire from the transaxle case.





(b) Remove the O-ring from the transmission wire.