Diesel Data: Automotive Repair

Disassembly








C50 MANUAL TRANSAXLE: SHIFT AND SELECT LEVER SHAFT: DISASSEMBLY

DISASSEMBLY





1. REMOVE SELECT SPRING SEAT NO.2
(a) Using a screwdriver, remove the select spring No. 2 seat E-ring, select spring seat No. 2 and select return compression spring No. 2 from the shift and select lever shaft.





2. REMOVE SHIFT LEVER INNER NO.2
(a) Using a pin punch (dia5 mm) and a hammer, remove the shift inner lever slotted spring pin and shift lever inner No. 2 from the shift and select lever shaft.
HINT: Check the orientation of shift lever inner No. 2.





3. REMOVE SHIFT LEVER INNER NO.1
(a) Using a pin punch (dia5 mm) and a hammer, remove the shift inner lever slotted spring pin, shift lever inner No. 1 and shift inter lock plate from the shift and select lever shaft.
HINT: Check the orientation of shift lever inner No. 1.





4. REMOVE SELECT INNER LEVER
(a) Using a pin punch (dia5 mm) and a hammer, remove the select inner lever slotted spring pin, select inner lever, select return compression spring No. 1 and select spring seat No. 1 from shift and select lever shaft.
HINT: Check the orientation of the select inner lever.





5. REMOVE SELECT SPRING NO.1 SEAT SHAFT SNAP RING
(a) Using 2 screwdrivers and a hammer, remove the select spring No. 1 seat shaft snap ring.