Removal

WINDSHIELD / WINDOWGLASS: POWER WINDOW REGULATOR MOTOR (for Hatchback Front Side): REMOVAL

REMOVAL
HINT:
- Use the same procedure for both the RH and LH sides.
- The procedure described below is for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE DOOR ARMREST COVER Reassembly
3. REMOVE FRONT ARMREST BASE PANEL UPPER Reassembly
4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY Reassembly
5. REMOVE FRONT DOOR WINDOW FRAME FRONT MOULDING
6. REMOVE FRONT DOOR WINDOW FRAME REAR MOULDING (for 3 Door)
7. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY Removal
8. REMOVE FRONT DOOR BELT MOULDING
9. REMOVE FRONT DOOR SERVICE HOLE COVER Reassembly
10. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY Reassembly
11. REMOVE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY Reassembly





12. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY FRONT
(a) Using "Torx" socket wrench T25, remove the 3 screws and the power window regulator motor.