Installation

THEFT DETERRENT / KEYLESS ENTRY: TRANSPONDER KEY AMPLIFIER: INSTALLATION

1. INSTALL TRANSPONDER KEY AMPLIFIER

(a) Connect the connector to the transponder key amplifier.





(b) Align the transponder key amplifier with the steering column upper bracket. Tilt the amplifier slightly and slide it into position.





(c) Push the transponder key amplifier, and engage the 2 claws to install the transponder key amplifier to the steering column upper bracket.

2. INSTALL UPPER STEERING COLUMN COVER Installation

3. INSTALL LOWER STEERING COLUMN COVER Installation

4. ADJUST SPIRAL CABLE Installation

5. INSTALL STEERING WHEEL ASSEMBLY Installation

6. INSTALL STEERING PAD Installation

7. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

8. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

9. INSPECT STEERING WHEEL CENTER POINT

10. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

11. INSTALL NO. 1 SWITCH HOLE BASE Installation

12. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle) Installation

13. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Automatic Transaxle) Installation

14. INSTALL FRONT NO. 1 CONSOLE BOX INSERT Installation

15. INSTALL FRONT NO. 2 CONSOLE BOX INSERT Installation

16. INSTALL FRONT CONSOLE BOX ASSEMBLY (for 2WD) Installation

17. INSTALL FRONT CONSOLE BOX ASSEMBLY (for 4WD) Installation

18. INSTALL CONSOLE BOX CARPET

19. INSTALL NO. 2 SWITCH HOLE BASE Installation

20. INSTALL FRONT UPPER CONSOLE BOX Installation

21. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

22. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle) Installation

23. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle) Installation

24. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Installation

25. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) Installation

26. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Installation

27. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

28. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

29. INSPECT SRS WARNING LIGHT

Diagnosis System