Service Data

SPECIFICATIONS: ALIGNMENT / HANDLING DIAGNOSIS: SERVICE DATA





HINT
* for Mexico vehicle height, B and C points are 15 mm (0.591 in.) higher than standard vehicle.





Measuring points (for Torsion Type Suspension):

* A: Ground clearance of front wheel center

* B: Ground clearance of lower suspension arm No. 1 bush front bolt center

* C: Ground clearance of axle beam set bolt center

* D: Ground clearance of rear wheel center

Measuring points (for Double Wishbone Type Suspension):

* A: Ground clearance of front wheel center

* B: Ground clearance of lower suspension arm No. 1 bush front bolt center

* C: Ground clearance of No. 1 lower suspension arm bushing set bolt center

* D: Ground clearance of rear wheel center

Wheel Angle (Unloaded Vehicle):

Camber Inclination (Unloaded Vehicle):

Caster Inclination (Unloaded Vehicle):

Steering Axis Inclination (Unloaded Vehicle):

Toe-in (Unloaded Vehicle):