Installation

LIGHTING (EXT): HEADLIGHT DIMMER SWITCH: INSTALLATION

1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY

(a) Engage the claw while loosening the clamp as shown in the illustration.





(b) Engage the clamp and install the headlight dimmer switch assembly as shown in the illustration.





(c) Connect the connector.

2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY Installation

3. INSTALL SPIRAL CABLE WITH STEERING ANGLE SENSOR Installation

4. INSTALL UPPER STEERING COLUMN COVER Installation

5. INSTALL LOWER STEERING COLUMN COVER Installation

6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

7. INSTALL NO. 1 SWITCH HOLE BASE Installation

8. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle) Installation

9. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Automatic Transaxle) Installation

10. INSTALL FRONT NO. 1 CONSOLE BOX INSERT Installation

11. INSTALL FRONT NO. 2 CONSOLE BOX INSERT Installation

12. INSTALL FRONT CONSOLE BOX ASSEMBLY (for 2WD) Installation

13. INSTALL FRONT CONSOLE BOX ASSEMBLY (for 4WD) Installation

14. INSTALL CONSOLE BOX CARPET

15. INSTALL NO. 2 SWITCH HOLE BASE Installation

16. INSTALL FRONT UPPER CONSOLE BOX Installation

17. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle) Installation

18. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle) Installation

19. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Installation

20. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) Installation

21. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Installation

22. INSTALL METER HOOD SUB-ASSEMBLY Installation

23. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

24. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

25. POSITION FRONT WHEELS STRAIGHT AHEAD

26. ADJUST SPIRAL CABLE Installation

27. INSTALL STEERING WHEEL ASSEMBLY Installation

28. INSPECT STEERING WHEEL CENTER POINT

29. INSTALL STEERING PAD Installation

30. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

31. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

32. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

33. INSPECT STEERING PAD Installation

34. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.