Removal

2AZ-FE ENGINE MECHANICAL: ENGINE UNIT: REMOVAL

1. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY Removal

2. REMOVE FUEL INJECTOR ASSEMBLY Removal

3. REMOVE INTAKE MANIFOLD Removal

4. REMOVE NO. 1 INTAKE MANIFOLD INSULATOR

(a) Remove the No. 1 intake manifold insulator.





5. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR Removal

6. REMOVE MANIFOLD STAY Removal

7. REMOVE NO. 2 MANIFOLD STAY Removal

8. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY Removal

9. REMOVE INLET WATER Removal

10. REMOVE THERMOSTAT Removal

11. REMOVE ENGINE OIL DIPSTICK

12. REMOVE ENGINE OIL DIPSTICK GUIDE Removal

13. REMOVE NO. 1 WATER BY-PASS PIPE

(a) Remove the bolt and 2 nuts, then remove the No. 1 water by-pass pipe.





(b) Remove the gasket.

14. REMOVE IGNITION COIL ASSEMBLY Removal

15. REMOVE KNOCK SENSOR Removal

16. REMOVE OIL PRESSURE SWITCH Removal

17. REMOVE ENGINE COOLANT TEMPERATURE SENSOR Removal

18. REMOVE RADIO SETTING CONDENSER

(a) Remove the bolt and radio setting condenser.