Reassembly

HEATING / AIR CONDITIONING: CONDENSER: REASSEMBLY

1. INSTALL COOLER DRYER

(a) Using pliers, install a new cooler dryer to the modulator.





(b) Apply sufficient compressor oil to a new O-ring and the cap fitting surface.





Compressor oil:

ND-OIL 8 or equivalent

(c) Using a 14 mm straight hexagon wrench, install a new cap to the cooler condenser core.





Torque : 2.9 Nm (30 kgf-cm, 26 in-lbf)

2. INSTALL NO. 1 COOLER CONDENSER CUSHION

(a) Install the 4 No. 1 cooler condenser cushions.