Installation

METER / GAUGE / DISPLAY: COMBINATION METER: INSTALLATION

1. INSTALL COMBINATION METER ASSEMBLY

(a) Connect the connector and temporarily install the combination meter assembly.





NOTICE:
When installing the combination meter assembly, do not damage the upper instrument panel sub-assembly and combination meter assembly.

(b) Install the combination meter assembly with the 3 screws.





2. INSTALL METER HOOD SUB-ASSEMBLY

(a) Engage the 7 claws and install the meter hood sub-assembly.





(b) Remove the applied protective tape on the steering column cover.





3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation